manualshive.com logo in svg

Fujitsu PRIMERGY Econel 100, Operating Manual

Share
Download
Fujitsu PRIMERGY Econel 100 Operating Manual Download Page 30

30

Operating Manual

 Econel 

100

Instructions: Connecting/disconnecting wires

Hardware Installation

4.6

Instructions: Connecting/disconnecting 
wires

V

CAUTION!

Be sure to read the documentation for the peripheral devices before 
connecting them.

Do not connect or disconnect data cables during a thunderstorm.

When removing a cable, always hold it by the plug.

Connect and disconnect the cables in the order described below.

Connecting cables

Ê

Turn off all power and equipment switches.

Ê

Pull all power plugs out of the grounded power sockets.

Ê

Plug all cables into the server and peripherals. Secure the data transmission 
cable connections (e. g. nut retention).

Ê

Plug all data communication cables into the utility sockets.

Ê

Plug all power cables into the grounded power sockets.

Disconnecting cables

Ê

Turn off all power and equipment switches.

Ê

Pull all power plugs out of the grounded power sockets.

Ê

Unplug all data communication cables from the utility sockets.

Ê

Loosen the nut retentions on the connector housings and pull the corre-
sponding cables out from the server and from the peripherals.

Summary of Contents for PRIMERGY Econel 100

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands