Econel 100
Operating Manual
19
Important Notes
Safety
Working with CDs/DVDs and CD/DVD drives
V
CAUTION!
●
Use only acceptable CDs/DVDs in your server's CD/DVD drive, in
order to avoid data loss, device damage and injury.
●
Therefore, check each CD/DVD for damage, cracks, breakage etc.
before inserting it in the drive.
Please note that any additional labels applied may change the
mechanical properties of a CD/DVD and cause imbalance.
Damaged and imbalanced CDs/DVDs can break at high drive speeds
(data loss).
In certain circumstances, sharp CD/DVD fragments can pierce the
cover of the CD/DVD drive (device damage) and can fly out of the
device (danger of injury, particularly to uncovered body parts such as
the face or neck).
I
You can prevent mechanical damage and damage to the CD/DVD drive,
as well as premature CD/DVD wear, by observing the following advice:
–
Only insert the CDs/DVDs in the drive when needed and remove
them after use.
–
Store the CDs/DVDs in suitable sleeves.
–
Protect the CDs/DVDs from exposure to heat and direct sunlight.
Note about the laser
The CD/DVD drive corresponds to the IEC 60825-1 laser class 1.
V
CAUTION!
The CD/DVD drive contains a light-emitting diode (LED), which under
certain circumstances produces a laser beam stronger than laser
class 1. Direct view into the laser beam is dangerous.
Never remove parts of the CD/DVD drive casing!
