Fujitsu PRIMERGY CX400 M4, Operating Manual

Page: 57 / 84

CX400 M4
Operating Manual 57
Starting up
5.3.2 Removing the server enclosure out of the rack
V
CAUTION!
At least two people are needed to lift the server enclosure out of the rack
cabinet.
For Japan, according to the following procedures.
If you remove the CX400 M4 server enclosure out of the rack, remove all
HDD, PSU and server node from the server enclosure.
In addition, at least two people are needed when server enclosure is
installed in the height of 25U or more.
(for Japan, see "
安全上のご注意
".)
V
Additionally, a lifter is required in the following cases:
– The server enclosure weighs more than 50 kg.
For configurations below 32 kg:
At least two people are needed to lift the server
enclosure out of the rack cabinet.
For configurations below 55 kg:
At least three people are needed to lift the server
enclosure out of the rack cabinet.
For configurations above 55 kg:
At least four people are needed to lift the server
enclosure out of the rack cabinet.