Fujitsu PRIMERGY CX400 M4, Operating Manual

Page: 64 / 84

64 Operating Manual
CX400 M4
Operation
●
After connecting the power cord, press the On/Off button after it
passes for more than 10 seconds.
Switching the server node on
The AC connected indicator lights up green (standby mode) when the server is
connected to the mains.
I
It will take about 60 seconds until the server node can be switched on.
Ê
Press the On/Off button.
The server node is switched on, performs a system test and boots the
operating system.
I
In the case of configurations with a large memory size, the boot
process may be prolonged and the screen may remain dark for
several minutes.
Switching the server node off
The power-on indicator lights up green.
Ê
Shut down the operating system properly.
The server node is switched off automatically and enters standby mode. The AC
connected indicator lights up green.
I
If the operating system does not turn off the server automatically, press
the On/Off button for at least four seconds and/or send a corresponding
control signal for power button override.
V
CAUTION!
There is a risk that data may be lost.
Other On/Off options
Besides the On/Off button, the server node can be switched ON and OFF in the
following ways:
– Wake up On LAN (WOL)
The server node is switched on by a command via the LAN (Magic
Packet™).