Fujitsu PRIMERGY CX400 M4, Operating Manual

Page: 47 / 84

CX400 M4
Operating Manual 47
Starting up
5.3 Installing/removing the server enclosure in
the rack
V
CAUTION!
●
Please observe the safety information and notes on rack mounting in
chapter
"Important information" on page 29 and section "Notes on
connecting/disconnecting cables" on page 60 .
●
At least two people are needed to install / remove the server
enclosure in the rack. (For Japan, see "
安全上のご注意 ".)
●
Do not extend more than one unit out of the rack simultaneously even
if the tilt protection is in place. If several units are simultaneously
extended out of the rack, there is a risk that the rack could tip over.
Fujitsu rack systems
The rack systems from Fujitsu support the installation of PRIMERGY server
enclosures:
– PRIMECENTER rack
– PRIMECENTER M4 rack
– DataCenter rack
– 19-inch standard rack (for Japan)
– 19-inch slimline rack (for Japan)
I
For information on mounting the server enclosure in the rack, see the
mounting instructions provided in this section and the manual of your
rack system.
For Japan, please see also to the "Rack system structure guide".
I
Online documentation for rack installation can be found on:
http://manuals.ts.fujitsu.com/index.php?id=5406-5605-5606
For Japan:
http://jp.fujitsu.com/platform/server/primergy/manual/peri_rack.html