28
Operating Manual
CX400 M4
Product description
3.3.2
Controls and indicators on the server enclosure
rear
3.3.2.1
Indicator on hot-plug PSU
Figure 9: Indicator on hot-plug PSU
3.3.3
Indicators of the server nodes
I
For the description of the indicators of the server nodes, see the
operating manuals of the relevant server nodes.
Pos. Indicator
Status
Description
1
PSU status
indicator
flashing
green
The server is switched off, but mains
voltage is present (standby mode).
green on
The server is switched on and operating
properly.
flashing
orange
An overload has been detected. The
PSU is still running, but failure might be
imminent.
orange on
An PSU failure has been detected.
Possible causes:
– Over/under voltage
– Overheating
– Fan failure
Summary of Contents for PRIMERGY CX400 M4
