Fujitsu MAA3182FC Series, Manual

Page: 29 / 327

C141-E054-02EN 1 - 8
(1) Link Data
Link Data is used when the initiator transmit control code to the target or when the
target responsds to the iniator.
Link Data supported by the drive are listed below.
1. Basic link service
a) Abort Sequence
b) Basic_Accept
c) Basic_Reject ABTS ; SCSI-2 Abort Tag
BA_ACC ; accept response to the abor
BA_RJT ; reject response to the abort
2. Extended link service
a) N_Port login
b) Logout
c) Process Login
d) Process Logout
e) Port Discovery
f) Address Discovery
g) Reinstate Recovery Qualifier
h) Read Link Status
i) Third-Party Process Layout
j) Accept
k) Link Service Reject
l) Loop Initialization Select Master
m) Loop Initialization Fabric Assigned
n) Loop Initialization Previously
Acquired
o) Loop Initialization Hard Assigned
p) Loop Initialization Soft Assigned
q) Loop Initialization Report Position
r) Loop Initialization Loop Position
PLOGI ; declare the initiator access the
target
LOGO ; declare the initiator finished
accessing the target
PRLI ; PRLI is send by the initiator
to a target to establish the
SCSI FCP operating features.
PRLO ; declare the initiator finished
accessing the target
PDISC ; issued by the initiator to
verify the address of the target
after Loop initialization
ADISC ; same as PDISC
RRQ ; issued by the initiator after
processing ABTS
RLS ; Request Link Error Status
Block
TPRLO ; declare the initiator finished
accessing the target
ACC ; response to the Link service
received
LS_RJT ; reject to the Link service
received.
LISM ; see 1.4.1 Loop Initialization
LIFA ; see 1.4.1 Loop Initialization
LIPA ; see 1.4.1 Loop Initialization
LIHA ; see 1.4.1 Loop Initialization
LISA ; see 1.4.1 Loop Initialization
LIRP ; see 1.4.1 Loop Initialization
LILP ; see 1.4.1 Loop Initialization