Fujitsu Lifebook E342 Manual Download

Page: 98 / 208

S e c t i o n F o u r

Menu Field

Options

Default

Description

Numlock:

Auto; Off; On.

[Auto]

Sets the NumLock function state when the computer
completes booting.

Hot Plug:

Enabled; Disabled.

[Enabled]

Enables and disables the ability to plug a mouse or keyboard into
the PS/2 port and have it immediately recognized and active.

Internal Pointing Device:

Auto Disabled;

[Auto Disabled]

Sets the device controlling the mouse cursor on the screen. Always

Always Enabled.

Enabled makes the pointing device always enabled whether
there is an external mouse or not. Auto Disabled makes the
pointing device turn off when an external pointing device is
connected to the PS/2 port.

Table 4-6 Fields, Options and Defaults of the Keyboard/Mouse Submenu of the Advanced Menu

Summary of Contents for Lifebook E342

















































































































































































































Search results

Summary of Contents for Lifebook E342

Reviews:

Related manuals for Lifebook E342

Brands by name

Popular brands

Fujitsu Lifebook E342, Manual

Search results

Summary of Contents for Lifebook E342

Reviews:

Related manuals for Lifebook E342

Brands by name

Popular brands