manualshive.com logo in svg

Fujitsu Lifebook E342, Manual

The Fujitsu Lifebook E342 user manual is a valuable resource for owners of this versatile laptop. With our website, you can easily download this manual for free, providing you with step-by-step instructions and detailed information on how to optimize your Lifebook E342 experience. Visit manualshive.com to access your free download.

Share
Download
background image

C A U T I O N

User data and user installed software
CAN NOT be recovered from the
Emergency Recovery CD

S e c t i o n   S i x

174

factory. Most often this is necessary if files or
software programs (only those files/programs
that came pre-installed) become corrupt or
accidentally erased.

You have two options available when 
performing recovery:

1. Recover Hard Drive without Format. This

choice replaces all the original factory
installed files and program structures without
eliminating your data files. You will have to
re-install any software that was not included
with the computer when you bought it (but
your data will be intact as long as the installa-
tion of the additional programs is performed
in the same manner).

2. Format and Recover Hard Drive. This choice

removes all the information on the hard disk.
If you choose this option, you will lose any
software you have installed and any other
files you created since you setup your com-
puter. You will have to re-install any software
that was not included with the computer
when you bought it.

P O I N T

It is recommended that you back-up all
data files prior to performing either of
the recovery options.

RECOVERY CD-ROM

Included with your notebook (in the
Accessories box) is an Emergency Recovery 
CD-ROM with the following content:

A backup  copy of the software originally
installed on your new Fujitsu LifeBook (can
only be used on the listed LifeBook models).

Sets of device drivers and utilities (in specific
directories) that are unique to your notebook
configuration for use as documented below.

Read-me files that provide additional use
information for items on this CD-ROM.

If you have access to the internet, visit the
Fujitsu PC Corporation Web Site at 
www.8fujitsu.com to check for the most 
current information and hints on how to 
perform recovery and system updates.

Restoring Your Pre-installed Software from
CD-ROM

The Emergency Recovery CD-ROM enables
restoration of your notebook disk drive con-
tents as they were originally shipped from the

P O I N T

Make certain you have your Operating
System Product ID # available (from the
Certificate of Authenticity) prior to per-
forming recovery. Once the process is
complete and you re-start your note-
book, you will be required to perform all
the setup steps as when the computer
was first bought. (see the section Starting
Your LifeBook for the First Time).

Summary of Contents for Lifebook E342

















































































































































































































Reviews:

No comments

Related manuals for Lifebook E342

Acer Aspire E1-522 Quick Manual preview
Aspire E1-522
Brand: Acer Pages: 9
Panasonic The Toughbook 31 Specification preview
The Toughbook 31
Brand: Panasonic Pages: 2
Panasonic The Toughbook 31 Operating Instructions Manual preview
The Toughbook 31
Brand: Panasonic Pages: 40
IBM ThinkPad R50 Series Setup Instructions preview
ThinkPad R50 Series
Brand: IBM Pages: 2
Acer Aspire One AOP531h Quick Manual preview
Aspire One AOP531h
Brand: Acer Pages: 12
Core Innovations CLT136401 User Manual preview
CLT136401
Brand: Core Innovations Pages: 26
Razer RZ09-0368 User Manual preview
RZ09-0368
Brand: Razer Pages: 13
Acer Aspire 4743Z Service Manual preview
Aspire 4743Z
Brand: Acer Pages: 354
Acer Aspire 7750Z Service Manual preview
Aspire 7750Z
Brand: Acer Pages: 274
Acer Aspire V5-571 Service Manual preview
Aspire V5-571
Brand: Acer Pages: 230
Dell Latitude 13 Service Manual preview
Latitude 13
Brand: Dell Pages: 46
Dell Latitude 3310 2-in-1 Setup And Specifications preview
Latitude 3310 2-in-1
Brand: Dell Pages: 39
JVC MP-DPX1E Instruction Manual preview
MP-DPX1E
Brand: JVC Pages: 2
JVC MP-XP741DE Service Manual preview
MP-XP741DE
Brand: JVC Pages: 185
JVC MP-XV841DE Service Manual preview
MP-XV841DE
Brand: JVC Pages: 16
JVC MP-XV841 Instructions Manual preview
MP-XV841
Brand: JVC Pages: 232
Gateway 6010GZ - Celeron M 1.4 GHz User Manual preview
6010GZ - Celeron M 1.4 GHz
Brand: Gateway Pages: 138
Sony SVE1511NFXS Specifications preview
SVE1511NFXS
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands