manualshive.com logo in svg

Fujitsu Lifebook E342, Manual

The Fujitsu Lifebook E342 user manual is a valuable resource for owners of this versatile laptop. With our website, you can easily download this manual for free, providing you with step-by-step instructions and detailed information on how to optimize your Lifebook E342 experience. Visit manualshive.com to access your free download.

Share
Download
background image

S e c t i o n   F i v e

140

EXTERNAL INSTALLATION 
OF A FLOPPY DISK DRIVE

To install a floppy disk drive externally,
you must mount the modular floppy disk drive
in the optional external adapter and attach the
external adapter to the connector on your
notebook.

To connect a floppy disk drive externally:

1. Close all files and exit all applications.

2. Mount the floppy disk drive in the external

adapter by aligning the connector ends and
pushing the drive into the external adapter
until it clicks into place.

3. Open the external floppy disk drive port

cover on the left side panel of your note-
book, (see Figure 5-11), by gently pulling 
on the right side of the cover and then 
tilting it open.

4. Align the connector of the external floppy

disk drive adapter with the connector
towards the body of your notebook with the
wide side of the connector up. (Figure 5-11)

6. Insert the connector of the external floppy

disk drive adapter firmly into the port on
your notebook until it clicks.

To disconnect an external floppy disk drive:

1. Close all files and exit all applications 

2. Squeeze together firmly on the release but-

tons on either side of the external floppy 
disk drive connector next to the body of
your notebook. (Figure 5-11.)

3. Pull the connector free.

4. Close the floppy disk drive port cover on

your notebook and press it shut until 
it latches.

5. Remove the floppy disk drive from the 

external adapter.

Figure 5-11 External Installation of a Floppy Disk Drive.

External Floppy Disk
Drive Port

External Floppy Disk

Drive Connector Cover

Connector
Release Button

External Floppy 
Disk Drive

Summary of Contents for Lifebook E342

















































































































































































































Reviews:

No comments

Related manuals for Lifebook E342

Kogan Atlas KAL14N300HA User Manual preview
Atlas KAL14N300HA
Brand: Kogan Pages: 10
Gateway MX6440 - Notebook Computer Setup Manual preview
MX6440 - Notebook Computer
Brand: Gateway Pages: 1
Hama 00126819 Operating Instructions Manual preview
00126819
Brand: Hama Pages: 22
Dell G7 7590 Setup And Specifications preview
G7 7590
Brand: Dell Pages: 23
Dell G7 7790 Setup And Specifications preview
G7 7790
Brand: Dell Pages: 22
Dell Inspiron 120L Quick Reference Manual preview
Inspiron 120L
Brand: Dell Pages: 190
Dell G7 7790 Service Manual preview
G7 7790
Brand: Dell Pages: 101
Panasonic CF-T5MWETZBM Brochure preview
CF-T5MWETZBM
Brand: Panasonic Pages: 2
Panasonic CF-T5MWETDVM - Toughbook T5 - Core Duo 1.06 GHz Specifications preview
CF-T5MWETDVM - Toughbook T5 - Core Duo 1.06 GHz
Brand: Panasonic Pages: 2
Panasonic CF-U1G Supplementary Instructions Manual preview
CF-U1G
Brand: Panasonic Pages: 8
Panasonic CF-H1BDBBZCM Specifications preview
CF-H1BDBBZCM
Brand: Panasonic Pages: 2
Panasonic CF-H1BDBBZCM Supplementary Manual preview
CF-H1BDBBZCM
Brand: Panasonic Pages: 3
Panasonic CF-53AUGZK1M Specifications preview
CF-53AUGZK1M
Brand: Panasonic Pages: 2
Panasonic CF-73ECQTXxM Service Manual preview
CF-73ECQTXxM
Brand: Panasonic Pages: 16
Panasonic CF-TOUGHBOOK 31UFLAXxM Service Manual preview
CF-TOUGHBOOK 31UFLAXxM
Brand: Panasonic Pages: 33
Panasonic CF-534 Series Operating Instructions - Basic Manual preview
CF-534 Series
Brand: Panasonic Pages: 28
Panasonic CF-74ECBAXBM - Toughbook 74 - Core Duo 2 GHz Use And Care Manual preview
CF-74ECBAXBM - Toughbook 74 - Core Duo 2 GHz
Brand: Panasonic Pages: 31
Panasonic CF-T4HWETZBM Service Manual preview
CF-T4HWETZBM
Brand: Panasonic Pages: 54

Brands by name

Popular brands

Load more brands