Fujitsu Lifebook E342, Manual

Page: 19 / 208

S e c t i o n O n e
8
LEFT-SIDE PANEL COMPONENTS
PC Card Slot
The PC Card Slot allows you to install two Type
I or Type II PC Cards or one Type III PC Card.
(See pages 135-137 for more information on PC
Cards.) The button to the left of the card slot
locks the card(s) in place, and the buttons
to the right of the slot eject the card(s) from
the slot. (Figure 1-8.)
Communications Port
The communications port may be configured
with either an RJ-11 telephone jack for an
internal 56K modem or an RJ-45 jack for an
internal Fast Ethernet (10/100 Base-T/Tx) port.
Check your packing sheet to see which option
(if any) you have on your LifeBook.
(Figure 1-8.)
External Floppy Disk Drive Port
A port for attaching an optional external floppy
disk drive with adapter. This allows you to con-
nect an optional floppy disk drive when the
Multi-function bays are being used for other
purposes. (Figure 1-8.)
Multi-function Bay One
This bay accommodates the following optional
and standard devices:
■
Lithium ion battery.
■
Optional SuperDisk 120
■
3.5" floppy disk drive.
Multi-function Bay Two
This bay accommodates the following optional
and standard devices:
■
24x maximum CD-ROM drive.
■
Optional 1.5x maximum
DVD-ROM drive.
■
Lithium ion battery mounted in the
Battery adapter for Multi-function Bay 2
(a second battery can be purchased separ-
ately for a dual battery configuration).
■
Optional 6.4 GB Second hard drive.
■
Optional Iomega Zip 100 Drive (standard
with E370).
■
Weight Saver.
Figure 1-8 LifeBook E Series Left-side Panel
PC Card Eject Buttons
Communications port
PC Card Slots
PC Card Lock
External FDD
connector
P O I N T
The Weight Saver option for Multi-func-
tion Bay 2 is meant to fill the bay when
no other device is installed. It is not rec-
ommended that you use your LifeBook
with no device in either of the Multi-
function Bays.
P O I N T
Your LifeBook may be configured with
no device in the Communications port
if you specified as such in your built-to-
order options.