manualshive.com logo in svg

Fujitsu Lifebook E342, Manual

The Fujitsu Lifebook E342 user manual is a valuable resource for owners of this versatile laptop. With our website, you can easily download this manual for free, providing you with step-by-step instructions and detailed information on how to optimize your Lifebook E342 experience. Visit manualshive.com to access your free download.

Share
Download
background image

S e c t i o n   F i v e

134

C A U T I O N

The bridge battery can not support an
operating notebook. The notebook must
be in Suspend mode.

C A U T I O N

Data may be lost and/or system errors
introduced if the warm-swap is not 
performed quickly or a power adapter 
is not installed.

Optional Zip Drive (standard with E370)

The Zip drive, using removable Zip disks with 
a capacity of 100MB, can be installed in Multi-
function Bay 2 only.

The first time you use a Zip drive on your
LifeBook E Series notebook, you should install
the Zip Tools software onto your system.

Installing the Zip Tools software.
1. Insert the Zip drive in Multi-function

Bay 2 as described on page 130.

2. Insert the Zip Tools disk into the Zip drive.

3. Use the Run command from the Windows

Start menu to run d:\install from the Zip
drive. Note that your system may assign
a drive designator other than d: to the
Zip drive.

4. Select your language preference and follow

the instructions that appear on the screen.

P O I N T

You may receive the following error while
installing the Zip Tools software: “No
Iomega drives found.” Select OK. The
installation process will continue correctly.

Under federal, state or local law it may be illegal
to dispose of batteries by putting them in the
trash. Please take care of our environment and
dispose of batteries properly. Check with your
local government authority for details regarding
recycling or disposing of your old battery, or
contact your support representative at 
1-800-8FUJITSU (1-800-838-5487).

Figure 5-7 Zip Drive

Summary of Contents for Lifebook E342

















































































































































































































Reviews:

No comments

Related manuals for Lifebook E342

Panasonic Toughbook CF-51PF66EBM Operating Instructions Manual preview
Toughbook CF-51PF66EBM
Brand: Panasonic Pages: 32
media-tech MT6350 Instruction Manual preview
MT6350
Brand: media-tech Pages: 13
XPG BC57 Quick Start Manual preview
BC57
Brand: XPG Pages: 30
AMILO Xa 3530 Quick Start Manual preview
Xa 3530
Brand: AMILO Pages: 70
Forensic Air Lite M-12 User Manual preview
Air Lite M-12
Brand: Forensic Pages: 10
Argus 88882137 Manual preview
88882137
Brand: Argus Pages: 12
Dell Inspiron 3501 Setup And Specifications preview
Inspiron 3501
Brand: Dell Pages: 23
Dell Inspiron 15 Owner'S Manual preview
Inspiron 15
Brand: Dell Pages: 89
HP Pavilion g4 Specifications preview
Pavilion g4
Brand: HP Pages: 2
HP Pavilion dv9900 Series Brochure & Specs preview
Pavilion dv9900 Series
Brand: HP Pages: 8
HP Pavilion dv6900 Series Specifications preview
Pavilion dv6900 Series
Brand: HP Pages: 2
HP Pavilion dv6760ea Specification Sheet preview
Pavilion dv6760ea
Brand: HP Pages: 2
HP PAVILION DV7 Disassembly Instructions preview
PAVILION DV7
Brand: HP Pages: 4
HP Pavilion DV6 Series Keyboard Removal Manual preview
Pavilion DV6 Series
Brand: HP Pages: 5
HP Pavilion DV7-2170 User Manual preview
Pavilion DV7-2170
Brand: HP Pages: 25
HP Pavilion DV4-1540 Specifications preview
Pavilion DV4-1540
Brand: HP Pages: 2
HP Pavilion dv6-1000 - Entertainment Notebook PC User Manual preview
Pavilion dv6-1000 - Entertainment Notebook PC
Brand: HP Pages: 25
HP Pavilion g6-1b00 Getting Started preview
Pavilion g6-1b00
Brand: HP Pages: 53

Brands by name

Popular brands

Load more brands