56
The security lock feature is in effect both when the system resumes from Off or Suspend state. You
always need to input the user password. Your system would not begin the boot sequence without
entering your supervisor or user password.
From Off State
1.
Turn on your system.
2.
When lock indicator display on “Status Indicator Panel LCD” lights up, enter the password
and press [Enter]. For example, if the password is 22222, Press Button Number 2 five times
and press [Enter].
3.
The notebook will boot to normal operation.
From Suspend State
1.
Press your Suspend/Resume button.
2.
When lock indicator display on “Status Indicator Panel LCD” lights up, enter the password
and press [Enter].
3.
The notebbok should resume normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three times in succession, the system will ‘beep’
for about 1 minute. If a valid password is entered within a minute (while system beeps), the beeping
will stop and the notebook will resume normal operation. If not or invalid password is entered while
the system beeps, the system will return to it’s previous locked state (suspend or off) and the Lock
indicator display on “Status Indicator Panel LCD” will go off. To reactivate the notebook after a pass-
word failure, you must press the Suspend/Resume button, then enter a correct password.
Warning
Remember the user password you specified on the Security Panel Application. If you forget the
password you will not be able to use your computer. The supervisor password can override the user
password.
This security function can work only after pushing suspend/resume button. When the system wakes
up by Ring Wake-up, Wake-on-LAN, and Timer Resume function, the security function does not
work.
Operate Your LifeBook Security Panel
