41
SECTION 2
1
Turn off the power of the PC unit and remove the AC adapter .
2
Close the liquid crystal display (LCD) and turn the PC unit upside down.
3
Remove the internal battery unit .
Restore the cover that was once removed in
Step 4.
4
Remove the cover.
Remove the screw on the bottom side of
the PC unit and remove the cover.
5
Install the expansion RAM module.
Align the hollow part on the memory and the
protrusion of the connector and insert the
memory firmly from the above and turn it down
until you can hears snap sound.
6
Fit the cover to the computer unit an
fastern it with the screws.
IMPORTANT
If the memory is not installed properly,
“Extension memory error” message may
appear or nothing may be displayed when
you turn on the PC. In such a case, press
down SUS/RES switch for 4 seconds or
more to turn off the power and install the
memory again.
Attach the battery before you turn on the
power.
Standard slot (DIMM-1)
Expansion slot
(DIMM-2)
Installing an Expansion RAM Module