Fujitsu LifeBook E-6666 Manual Download Page 20

Page: 20 / 110

SECTION 1

Expansion Keyboard/Mouse Connector

This is the connector to connect a PS/2 mouse and a numeric keyboard / keyboard.

Serial Connector

This is the connector to connect the devices with RS-232C interface sold separately.

Parallel Connector

This is the connector to connect a printer and other devices sold separately.

External Display Connector

This is the connector to connect a CRT display and other displays sold separately.

USB Connector (not supported by Windows NT)

You can connect a FDD unit, a printer and other USB standard peripherals to this connector.
There are 2 ports and you may connect a USB standard peripheral to either of the ports.

Docking Station Connector

This is the connector to connect a full docking station, a mini docking station and a port replicator.

DC-IN Connector

This is the connector to connect the AC adapter.

Expansion RAM Module Slot

This is the slot to install the memory unit of this PC.

Battery Bay

This is the bay to install the Battery.

CD-ROM Drive Bay

This is the bay to install CD-ROM drive.

Important note

When you connect an optional device to each connector, you must ensure the right direction
of the connectors and connect straight.

Summary of Contents for LifeBook E-6666















































































































Search results

Summary of Contents for LifeBook E-6666

Reviews:

Related manuals for LifeBook E-6666

Brands by name

Popular brands

Fujitsu LifeBook E-6666, Manual

Search results

Summary of Contents for LifeBook E-6666

Reviews:

Related manuals for LifeBook E-6666

Brands by name

Popular brands