71
SECTION 3
Figure 1-2 Main - Primary/Secondary Master Menu
Setup Item
Type
Maximum Capacity
Multi-Sector
Transfers
Selections
Auto
None
CD-ROM
ATAPI Removable
User
xxxx MB
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
MAX 32
MAX 64
MAX 128
Note (Item Specific Help)
Select ATA/ATAPI device type. If ‘Auto’ is
selected, the type is automatically identified
at POST by the BIOS. It does not carry out
Cylinder/Head/Sector display in the case of
over 8.4GB-HDD when Auto mode.
Hard Disk = you enter parameters of hard-
disk drive installed at this connection.
CD-ROM = a CD-ROM drive is installed here.
ATAPI Removable = removable disk drive is
installed here.
If ‘None’ is selected, all of the following setup
items do not appear. When ‘User’ is selected,
you can specify Cylinders, Head and Sectors.
Auto=autotypes ATA/ATAPI drive installed
here.
Display maximum capacity calculated from
parameters of hard disk when ‘Auto’ is
selected and the type is identified as hard
disk, or ‘User’ is selected.
This option can not be changed when ‘Auto’
is selected.
Specify the number of sectors per block for
multiple sector transfer. ‘MAX’ refers to the size
the disk returns when required.
1.1.1 Main - Primary Master, Secondary Master Menu
S
F1
Help
↑↓
Select Item
-/Space
Change Value
F9
Setup Defaults
ESC
Exit
←→
Select Menu
Enter
Select
:
Sub-Menu
F10
Save and Exit
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power
Boot
Info
Exit
Primary Master [FUJITSU MHH2064AT-(PM)]
Type:
[
AUTO
]
Maximum Capacity:
12073 MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control:
[Enabled]
Transfer Mode:
[Fast PIO 4]
Ultra DMA Mode:
[Ultra DMA 2]
Item Specific Help
Select ATA/ATAPI
drive installed
here.
[AUTO]
The BIOS auto-types
the drive on boot
time.
Except [Auto]
You enter parameters
of the drive.
[None]
The drive is
disabled.
