48
Critical Point
When fitting the cover to the computer
main unit again, firmly insert the pawls
into the holes on the back of the
computer main unit.
Restore the cover to the computer main
unit and fasten it with the screws, both
of which were once removed in the
previous step 2.
7
Fit the cover to the computer main
unit and fastern it with the screws.
back of main unit.
holes
CAUTION
(DAMAGE)
The expansion RAM module is made up of parts that are extremely vulnerable to
static electricity and can be damaged by the static electricity built up inside the main
unit. When installing or removing an expansion RAM module, hold it by the edges. Do
not touch any terminals or ICs. Also, do not touch any parts or terminals within the
computer main unit.
Checking expansion memory
To check expansion memory after installing an expansion RAM module, look at the [DIMM]
item in the Info menu of the BIOS setup. For example, when a 32MB expansion RAM module
has been installed, the number displayed is 32MB greater than the initial value. If the expansion
RAM module has been installed correctly but the number has not displayed, it means the RAM
module is either broken or defective. If this happens, contact the store where the RAM module
was purchased.
