Fujitsu LifeBook C6530 Instructions Manual Download

Page: 104 / 111

Error Messages

System timer error

Real time clock error

System CMOS checksum bad - Default configuration used

Previous boot incomplete - Default configuration used

Press <F1> to resume,<F2> to Setup

Check date and time settings

Password locked: Fixed Disk n

No Save To Disk partition or file exists on Fixed Disk
- Save To Disk features is disabled.

Not enough Save To Disk partition or file exists on Fixed
Disk.
- Save To Disk feature is disabled.

Hard Disk Drive is not installed.
- Save To Disk feature is disabled.

Unknown Save To Disk error.
- Save To Disk feature is disabled.

Hard disk sector read function failed.
- Save To Disk feature is disabled.

Hard disk sector write function failed.
- Save To Disk feature is disabled.

Save To Disk partition or file corrupted.
- Save To Disk feature is disabled.

Fixed Disk is not installed. Cannot restore from disk.

To restore from disk : turn off system, install original
fixed disk and reboot.
Press <F1> to continue to boot without save to disk
data.

Fixed Disk has been changed. Cannot restore from disk.

To restore from disk : turn off system, install original fixed
disk and reboot.
Press <F1> to continue to boot without save to disk data.

Table 2-2 Error Messages in Diagnostic Screen

Summary of Contents for LifeBook C6530
















































































































Search results

Summary of Contents for LifeBook C6530

Reviews:

Related manuals for LifeBook C6530

Brands by name

Popular brands

Fujitsu LifeBook C6530, Instructions Manual

Search results

Summary of Contents for LifeBook C6530

Reviews:

Related manuals for LifeBook C6530

Brands by name

Popular brands