Fujitsu l2010, User Manual, Page: 80 / 106

64
❑
It takes too long to retrieve the network and display the connected
computers
❍
Countermeasure
Retrieve computers in the following procedure:
• In case of the Windows XP
1 Click “Start” button, then click “search”.
2 Click “Computer or people”.
3 Click “Computers on the network”.
4 Input the name of computer to be connected with in “Computer name” and click “search”.
5 Click the icon of connected computer.
❑
Disconnected communication a few minutes after every connection to
the station
❍
Countermeasure
Check the setting of the “Enable network access control using IEEE802.1X”.
Critical Points
In case of restricting the access of wireless LAN clients using IEEE802.1X authentication,
put a check mark on “Enable network access control using IEEE802.1X”. In case of home
use, remove a check mark on “Enable network access control using IEEE802.1X”. For the
method of setting related with IEEE802.1X authentication, refer to the station manual.
❑
Connection check with executed PING command
Check if IP packet has correctly reached the destination by executing PING command in the following
procedure:
Critical Points
In order to execute PING command, it is necessary to install TCP/IP protocol in advance.
Egmont Sec 1(60-66) 30/5/03, 9:17 AM 64