Fujitsu l2010, User Manual

Page: 64 / 106

48
12. Input a value for the “Network key”.
Input the same value as the “Network key” input in the preceding step 11. If a different
value is input, setting results in failure.
13. Confirm that the “Key index (Advanced)” is set as “1”.
The “Key index (Advanced)” can be set in maximum four from “1” to “4”. Set “1” generally.
14. Click the “Authentication” tab and then click the check box of the “Enable
network access control using IEEE802.1X” so that it becomes .
Critical Points
In case of restricting the access of wireless LAN clients using IEEE802.1X
authentication, put a check mark on
“Enable network access control using
IEEE802.1X“. In case of home use, remove a check mark on “Enable network
access control using IEEE802.1X“.
For the method of setting related with IEEE802.1X authentication, refer to the station
manual.
15. Click the “OK”.
Egmont Sec 1(46-59) 30/5/03, 9:13 AM 48