IP-HE950 Hardware User's Guide
Chapter 1 Preparations
Copyright 2017 FUJITSU LIMITED
7
(4)
Direction keys
(
)
Used to operate the Front panel.
For instructions, refer to the IP-HE950 Software User's Guide.
(5)
(6)
(7)
(8) ENTER key
(ENTER)
Used to finalize the displayed data on the Front panel.
For instructions, refer to the IP-HE950 Software User's Guide.
(9) CANCEL key
(CANCEL)
Used to cancel the displayed data on the Front panel.
For instructions, refer to the IP-HE950 Software User's Guide.
(10) Power LED
(PWR)
Goes on when this unit is powered on.
(11) Status LED
(RDY)
LED that shows the operating status of the IP-HE950. The LED
light color is green when operation is normal.
For details, refer to "Table 5-3 LED indications" in Section 5.2.
(12) Video input status LED
(INDWN)
Turns on or blinks when input is abnormal (input down/input
error).
For details, refer to "Table 5-3 LED indications" in Section 5.2.
(13) Alarm LED
(ALM)
Turns on or blinks when operation is abnormal.
For details, refer to "Table 5-3 LED indications" in Section 5.2.
(14) Power switch
Powers on/off this unit with 100-240 VAC. For instructions, refer
to "3.1 Turning On/Off the IP-HE950."
(15) AC cord clamp
AC cord clamp for fixing the power cord in place. For instructions,
refer to "2.2.2 Connection to a power source."
(16) Power inlet connector
Can be connected to a 100-240 VAC commercial power supply
by a power cord with a standard two-prong plug with ground.
For instructions, refer to "2.2.2 Connection to a power source."
For cable connection information, refer to "4.2 Cable and
Connector Details."
(17) Fan
Maintenance-free fan for cooling the inside of the unit.
(18) FG terminal
(FG)
Used to connect FG to this unit when required.
For instructions, refer to "2.2.1 Connection to ground."
(19)
ETHERNET port 2 for
LAN connection
(LAN2)
10BASE-T/100BASE-TX/1000BASE-T communication port.
For instructions, refer to "2.6 Connection to LAN Equipment." For
cable connection information, refer to "4.2 Cable and Connector
Details."
(20)
Status LED
(LINK/ACT)
LED that shows the status of LAN port 2. For details, refer to
"Table 5-3 LED indications" in Section 5.2.
(21)
Speed LED
(100/1000M)
LED that shows the speed of LAN port 2. For details, refer to
"Table 5-3 LED indications" in Section 5.2.
(22) DVB-ASI output
(ASI-OUT1)
DVB-ASI output connectors. Output is 75
Ω unbalanced
output.
For instructions, refer to "2.5 Connection to DVB-ASI Equipment."
For cable connection information, refer to "4.2 Cable and
Connector Details."
(23) DVB-ASI output
(ASI-OUT2)
(24) External audio input
(AUDIO)
External audio input connector supported in the future. This is
disabled now.
