IP-HE950 Hardware User's Guide
Chapter 1 Preparations
Copyright 2017 FUJITSU LIMITED
6
1.4
Parts Names
This section describes the name and function of each part of the IP-HE950.
The following figures show the layouts of parts on the outside of this unit, and the table
underneath lists the names and functions of individual parts. The numbers in the figures
correspond to the numbers in the table.
Figure 1-4 Front view (common to the IP-HE950E and IP-HE950D)
Figure 1-5 Rear view (IP-HE950E)
Figure 1-6 Rear view (IP-HE950D)
Table 1-3 Parts names
No.
Name
Function
(1) Maintenance port
Port used by a customer engineer. Normally, it is not used. The
cover is fixed in place with a screw.
(2) USB port
USB port supported in the future. This is disabled now. The
cover is fixed in place with a screw. Never remove the cover.
(3) Front panel
Used to display the unit status and make various settings. 22
characters x 4 lines
1.4
