Fujitsu FPCM35351, User Manual

Page: 69 / 87

Troubleshooting and tips
A26391-K279-Z220-1-7619, edition 1 61
Display screen is blank or difficult to read
Cause Troubleshooting
Brightness set too low. ► Press the
Fn
button twice to open the
Fujitsu
Menu
.
This menu contains the tab for changing the brightness.
Power saving has been activated
(monitor is blank). ► Tap on the display screen to reactivate the display.
Note that this is a normal power-saving feature.
The cursor does not correctly follow the pen movements
Cause Troubleshooting
Pin incorrectly calibrated
Windows XP:
► Calibrate the pen under
Tablet and Pen Settings
in the
Control Panel, see "Calibrating the pen".
Windows Vista:
► Calibrate the pen under
Mobile PC - Tablet PC
Settings
in the Control Panel, see "Calibrating the
pen".
► Check whether the battery is installed correctly in its
compartment.
► Switch the notebook on.
Infrared data transfer is not working
Cause Troubleshooting
No visual contact between Tablet PC
and infrared receiver. ► Ensure visual contact between Tablet PC and
infrared receiver.
Distance between Tablet PC and
infrared receiver > 1 m. ► Reduce the distance between the Tablet PC and the
infrared receiver.
The infrared receiver on the Tablet
PC is not in the effective field (approx.
30
° horizontal and approx. 15 °
vertical) of the infrared interface on
the other device.
► Check the effective field.
The other device does not comply
with the IrDA standard, revision 1.1 or
1.0. ► Only use devices that comply with the IrDA
standard, revision 1.1 or 1.0.