Fujitsu fi-5120C Operator'S Manual Download Page 26

Page: 26 / 157

fi-5120C / fi-5220C Image Scanner Operator

Guide

TROUBLE SHOOTING

CONTENTS MAP

TOP

2.1 Turning the Scanner ON (6)

1 2 3 4 5

Power Save Mode

The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.

If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power Save mode.

In the Power Save mode, the indication of the Function Number display on the operator panel goes out, but the green LED

stays lit.

To return from the Power Save mode, perform one of the following:

●

Load the document on the ADF paper chute.

●

Press any button on the operator panel.

The scanner will be turned OFF when pressing down the power button for at least two seconds.

●

Execute a command from the scanner driver.

1 2 3 4 5

Summary of Contents for fi-5120C















































































































































Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands

Fujitsu fi-5120C, Operator'S Manual

Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands