Fujitsu fi-5120C Operator'S Manual Download Page 145

Page: 145 / 157

●

Carbonless paper contains chemical substances that may damage the Pad ASSY or rollers (e.g. Pick

roller) when documents are fed. Pay attention to the following:

Cleaning:

If pick errors occur frequently, clean the Pad ASSY and Pick rollers.

For details on cleaning the Pad ASSY and Pick rollers, see "

4.3 Cleaning the ADF

Replacing parts:

The service life of the Pad ASSY and Pick rollers is sometimes shortened when scanning medium-

grade paper documents.

●

If paper containing wood is scanned, the service life of the Pad and Pick roller may become shorter

than that of the Pad and Pick roller used for scanning only woodfree paper.

●

The pad or rollers of the scanner could be damaged if photographs or sheets of paper attached to

the scanned document have contact with the pad or rollers during scanning.

●

Scanning documents of calendered paper such as photographs may damage the surface of them.

HINT

When using the ADF, the leading edge of all document sheets must be evenly aligned. Make sure that

curling at the leading edge is within the following tolerances:

Summary of Contents for fi-5120C















































































































































Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands

Fujitsu fi-5120C, Operator'S Manual

Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands