background image

fi-5120C / fi-5220C Image Scanner Operator 

Guide

 

TROUBLE SHOOTING

 

CONTENTS MAP

 

TOP

 

 3.8 Skipping blank pages (2)

 

 

 

 1 

 2 

 

3.  Check the [Blank Page Skip] box.

 

If an item other than "Ram cache" or "Use Both Memory" has been selected in the [Cache Mode:] and this check box is 

marked, it will change to "Ram cache". 

 

4.  With the slider control under [Blank Page Skip], specify the Blank Page Skip degree. 

 

In Binary/Halftone mode

 

 

For white pages, use the 

[Black Dots Ratio]

 slider bar to set the skip condition. For black pages, use the 

[White Dots 

Ratio]

 scroll bar to set the skip condition.  

The value displayed to the right of the scroll bar displays the noise ratio(*1). If a scanned document is below this value, it 

is recognized as a blank page. The setting range is OFF(- -) and 0.2% to 3.0% (in increments of 0.2%).

 

*1: Ratio of black dots included in the scanning area. (for white pages)

 

 

 

In Color/Grayscale mode

 

Use the slider bar to set the skip condition in five stages from 1 to 5. To make the blank pages easy to skip, increase the 

value of the setting.

 

 1 

 2 

 

All Rights Reserved Copyright 2006-2009 © PFU LIMITED

Summary of Contents for fi-5120C






























































































































































Reviews: