Fujitsu fi-5120C Operator'S Manual Download

Page: 149 / 157

fi-5120C / fi-5220C Image Scanner Operator

Guide

TROUBLE SHOOTING

CONTENTS MAP

TOP

7.5 Multi feed Detection Conditions (1)

There are three multi feed detection modes: document overlapping, document length, and both document thickness

and length. The following conditions must be satisfied in each of these detection modes.

Detection by Document Overlapping

Sheets of the same thickness shall be set in the ADF at a time.

●

Document thickness: 0.065 to 0.15mm

●

Punched holes are not allowed within 35mm of the vertical center line of the document.

●

Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.

Detection by Document Length

Sheets of the same length shall be set in the ADF at a time.

●

Document length deviation: 1% or less

●

Punched holes are not allowed within 35mm of the vertical center line of the document.

Detection by Document Overlapping and Length

Sheets of the same thickness and length shall be set in the ADF at a time.

●

Document thickness: 0.065 to 0.15mm

●

Document length deviation: 1% or less

●

Punched holes are not allowed within 35mm of the vertical center line of the document.

●

Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.

ATTENTION

Multifeed detection by overlap will often mis-detect very thick paper or plastic document.

When scanning documents like this, please disable the multifeed detection.

Summary of Contents for fi-5120C















































































































































Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands

Fujitsu fi-5120C, Operator'S Manual

Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands