background image

fi-5120C / fi-5220C Image Scanner Operator 

Guide

 

TROUBLE SHOOTING

 

CONTENTS MAP

 

TOP

 

 2.5 How to Use the Scanner Driver (5)

 

 

 

 1   2   3   4 

 5 

 6   7   8   9   10   11   12   13   14   15 

 

Image Mode 

Specifies the image type for the scanned documents 

Black & White Documents are scanned in binary (black and white).
Halftone

Documents are scanned through halftone processing in black and white.

Grayscale

Documents are scanned in gradations from black to white. For this mode you can select 

256 gradations or 4 bit (16 gardations). 

Color

Documents are scanned in color. For this mode, you can select 24 bit Color, 256 Color or 

8 Color.

[Scan] button

Starts scanning documents with the current settings.

[Preview] button

Documents are scanned preliminarily before the actual scanning. 

You can confirm the image of the documents in the preview window.

[Close] button

Saves the current settings and closes this window.

[Reset] button

 

Used to undo changes of settings.

[Help] button

 

Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pushing the [F1] key.

[About...] button

 

Opens an information window about the FUJITSU TWAIN32 Scanner Driver's version.

 

 

 1   2   3   4 

 5 

 6   7   8   9   10   11   12   13   14   15 

 

All Rights Reserved Copyright 2006-2009 © PFU LIMITED

Summary of Contents for fi-5120C






























































































































































Reviews: