Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining Download Page 76

Page: 76 / 110

Chapter 4 Troubleshooting
4.3 Removing Stuck Tapes From Slots

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining

P3AM-5392-07ENZ0

4.3

Removing Stuck Tapes From Slots

Procedure

Unlock the magazine and remove it from the library.

•

Use the OCP, see section

"5.7 Removing and Replacing a Magazine Using the OCP" (page 92)

•

Use the RMU, see section

"5.8 Removing and Replacing a Magazine Using the RMU" (page 93)

The finger holes on the back side of the magazines (see

Figure 4.1

) allow the user to pull

the cartridges out of the slot. Remove and insert the cartridge mechanically. Repeat the

process ten times.

Figure 4.1 Removing stuck tapes from slot

During this process the burr will be removing.

Insert cartridge in the magazine.

Put the magazine back to the tape Library. Pull lightly on the magazine to check that it is
locked.

End of procedure

Summary of Contents for ETERNUS LT40 S2















































































































Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands

Fujitsu ETERNUS LT40 S2, Installing, Starting Up And Maintaining

Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands