Chapter 3 Remote Panel Operation
3.11 Setting Library Information
FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-
Copyright 2020 FUJITSU LIMITED
P3AM-6932-06ENZ0
112
2
A setting window for the selected adapter is displayed. From this window, settings for the
addressing mode, LOOP ID, and security can be made.
Figure 3.33 Host interface setting window
3
Make settings for each item.
Table 3.29 Host interface setting items
4
Click the [OK] button after all settings are completed. To restore the conditions before the
settings, click the [Reset] button.
5
After clicking the [OK] button, the system displays a confirmation window showing the
input contents. Click the [OK] button if it is OK to proceed. To make entries again, click the
[Back] button.
6
If processing is completed, the system displays a window showing the processing results. To
continue settings of the host interface, repeat the above procedure starting with
Setting item
Explanation
Topology
Select from "Fabric" or "FC_AL".
Addressing Mode
This item is enabled if "FC_AL" is selected in Topology.
Select from "Hard" and "Soft."
LOOP ID
This item needs to be specified if "Hard" is set as the Addressing Mode.
Link Speed
Link Speed is "Auto" and cannot be changed.
