Chapter 3 Remote Panel Operation
3.8 SNMP Setup Information
FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-
Copyright 2020 FUJITSU LIMITED
P3AM-6932-06ENZ0
106
3.8
SNMP Setup Information
Click the [SNMP] button displayed under [Information] to reference SNMP setup information such as the
community, the trap destination address, and the send trap function. The following window is displayed.
Figure 3.29 SNMP setup information display window
Table 3.26 SNMP setup information
Display item
Explanation
Community
Displays communities (up to five communities).
User Info
Displays following user information (up to five communities):
"User Name", "Authentication", "Authentication Mode", "Encryption", and "Encryption
Mode"
Trap Destination Address
Displays "IP Addresses" for Trap destinations (up to 10 destination addresses).
Also displays "SNMP Version", "Community", and "User Name" for Traps that are to be
sent.
Send Trap
Displays whether to send Trap.
•
Enable: Send trap.
•
Disable: Do not send Trap.
Device Administrator
Displays the administrator name of the LT270 S2.
Device Name
Displays the LT270 S2 name.
Device Location
Displays the LT270 S2 installation location.
Monitored Port
Displays the monitor target ports.
Engine ID
Displays the engine ID of the SNMP agent.
