manualshive.com logo in svg

Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, User Manual

Share
Download
Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series User Manual Download Page 60

45

■

Setting a PC card

A PC card is a card in a size of a business card, and it works for peripheral devices such as modem.
Two dummy cards are inserted when you purchase the computer.

 WARNING

●

Do not put your finger into the PC card slot when inserting a PC card.

Or, you may get injured.

Point

•

To insert the Type III PC card, remove two dummy cards, and insert the card in the slot on the
display side.

•

Depending PC cards, you may have to turn off the computer when inserting it, or you may
need to install its device driver, regardless of the operating system used. For details, see the
manual attached to the PC card.

•

Do not put an object on or give shocks to the connector that connects the PC card and its code.
Otherwise it may cause a failure.

1

For Windows NT, turn off the computer, and remove the AC adapter.

For Windows 2000/Me/98, go to the step 2.

2

Press the PC card eject button (if the dummy card is there).

If the dummy card is not inserted, go to the step 4.

Gently press the PC card eject button once, and the button pops out.

3

Remove the dummy card.

Press the PC card eject button that popped out, and remove the dummy card.

CHAPTER 3 (44-52)

11/15/01, 2:17 PM

45

Summary of Contents for DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands