Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, User Manual

Page: 53 / 81

38
3 CD
This section describes how to handle, insert, and remove a CD.
■
Handling guidelines
Follow the following guidelines to prevent faults when handling a CD.
Guidelines for CD media
●
Do not affix a label on either side of the disk, and do not use a ball-point pen or pencil to write
on the disk.
●
Do not touch or damage the data side of the disk.
●
Do not bend the disk, and do put an heavy object on the disk.
●
If the CD gets dirty or wet, use a moistened soft cloth and wipe it from the center to the edge,
and then use a dry cloth to dry it.
●
Make sure that you do not spill coffee or similar liquid over the media.
●
Do not store it in an extreme temperature environment.
●
Do not store it in a humid or dusty environment.
Guidelines for the drive
●
Do not use the CD, if it is not safeguarded according to “Handling guidelines for CD media”
above, or it has bends, cracks, or fissures. Or, it may cause a failure. The warranty is not
applied to any failure caused by the use of such CDs.
●
This computer accepts only round CDs. Do not use CDs of a variant shape, which is not round.
Or, it may cause a failure. The warranty is not applied to any failure caused by the use of CD
in a variant shape.
●
Use of a commercially available CD-ROM drive cleaning disk may put dusts on the lens.Do
not use a CD-ROM drive cleaning disk.
Point
• CA CD-ROM is the same as a music CD (compact disk) except it has computer information
(characters) instead of sound. ROM stands for Read Only Memory. The computer is able to
read the information from a CD-ROM, but not able to write on it (unless you have selected
CD-R/RW).
• This computer accepts any CD that has one of the following marks. Do not use the CD if it
does not carry any of them. Or, it may cause a failure.
For some marks, you need specific application software.
You can write on the CD that carries the
*
mark, if you have a CD-R/RW drive.
CHAPTER 3 (33-43) 11/15/01, 2:16 PM 38