manualshive.com logo in svg

Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, User Manual

Share
Download
Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series User Manual Download Page 24

9

Connect the keyboard, mouse, and power cord to the computer.

 WARNING

●

Connect the grounding wire to the device that needs to be grounded

before turning it on.

You may get electrical shock if you do not provide grounding.

Do not connect the grounding wire to the gas pipe.

Otherwise it may cause a fire.

●

Turn the computer and connected devices off and remove the plug from

the power outlet before installing or uninstalling the keyboard, mouse,

power cord, or grounding wire.

Otherwise it may cause an electric shock.

●

For the keyboard and mouse, use the genuine Fujitsu products.

Otherwise, it may cause an electric shock or fire.

 CAUTION

●

Make sure that you connect the cable correctly.

The computer and peripheral devices may be damaged, if they are

connected with wrong cables.

2 Connection

CHAPTER 2 (07-22)

11/15/01, 2:14 PM

9

Summary of Contents for DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands