manualshive.com logo in svg

Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, User Manual

Share
Download
Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series User Manual Download Page 26

11

3

Connect the power cord to the adapter.

4

Connect the power cord to DC-IN.

Connect the adapter cable plug to the DC-IN connector on the computer.

5

Connect the power cord to the power outlet.

Take the following notes when connecting the power cord.

●

Dot not connect or disconnect the plug with wet hands.

●

Do not damage or modify the power cord.

●

Do not compress, pull, twist, or heat the power cord.

●

Do not use the power cord or power outlet if they are damaged or loose.

●

Use a dry cloth to clean the plug pins and power outlet, if they are covered with dust.

●

Connect the power cord to the 230VAC domestic power.

●

Disconnect the power cord from the power outlet during a lightning storm.

●

To disconnect the power cord, do not pull the cord but hold the plug and pull.

●

Insert the plug fully to the end, when inserting it.

●

Disconnect the plug from the power outlet, if you are not using your computer for an
extended period of time.

Adapter

Power cord

CHAPTER 2 (07-22)

11/15/01, 2:14 PM

11

Summary of Contents for DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands