Fujitsu AOUH18LPAS1, Service Manual

Page: 119 / 169

7. Various control
7-1. Auto restart
When the power was interrupted by a power failure etc. during operation, the operation contents at
that time are memorized and when the power is recovered, operation is automatically started with
the memorized operation contents.
Operation contents memorized when the power is interrupted
Operation mode
Setting temperature
Fan mode setting
Timer mode and set time (set by wireless remote controller)
Airflow direction setting
Swing
ECONOMY operation
Remote control setting
WLAN indicator lamp setting
7-2. MANUAL AUTO operation
When the wireless remote controller is lost or battery power dissipated, this function will work without
the remote controller.
When MANUAL AUTO button is pressed more than 3 seconds and less than 10 seconds, MANUAL
AUTO operation starts as shown in the table below. To stop operation, press the MANUAL AUTO
button for 3 seconds.
Operation mode Auto changeover
Fan mode AUTO
Timer mode Continuous (no timer setting available)
Setting temperature 75.2°F (24°C)
Horizontal louver setting Standard
Vertical louver setting According to memory position
SWING Off
ECONOMY Off
Human sensor Off
7-1. Auto restart
- (04-23) -
7. Various control
CONTROL AND FUNCTIONS CONTROL AND FUNCTIONS