FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 80 / 138

4-18
4. Adjustments
FinePix S6000fd/S6500fd Service Manual
4-10. [F5] : Camera Adjustment
(shutter adjustment, adjustment for reduced aperture sensitivity, ISO sensitivity adjustment, white balance adjustment, AE
adjustment, offset level adjustment)
< Setup for Camera Adjustment> < Importance! >
1. Calibrate the pattern box before adjusting the camera.
2. Ensure that camera adjustment is carried out in dark surroundings (ideally in a darkroom
environment). If a darkroom cannot be set up, use a box painted black on the inside to cover the
camera before performing the adjustment.
<Note>
An error will occur during Camera adjustment, and adjustment cannot be completed, unless the pattern box is calibrated
correctly.
Camera
Filter (LB140)
Pattern box
Maximum 30mm
Centerline
Maximum 30mm
Maximum 60mm
Centerline
< Use the pattern box for Camera adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
160 ± 5cd/m
2
(with LB140 filter)
No chart, center of pattern box
Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 160 ± 5cd/m
2
.
(2) Color temperature:aa
6100 ± 50K (with LB140 filter)
No chart, center of pattern box
Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the filter (LB140) in contact with the color temperature meter, adjust
the pattern box color temperature to 6100 ± 50K.
<Calibration method of pattern box>
LB140
Pattern BOX
(All white)