FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 29 / 138

3-1
3. Schematics
FinePix S6000fd/S6500fd Service Manual
Part name Block name Function
LENS ASSY CCD FPC BLOCK CCD Output
MAIN PWB ASSY AV BLOCK Audio/Video IN/PIT (IC281)
CAMERA BLOCK CCD Output A/D Conversion (IC102)
DCDC BLOCK Power Supply Generation (I301, IC305), Power Control
EVF BLOCK EVF Control (IC452)
FDI BLOCK Face Detection Signal Processing (IC651)
FLASH JACK BLOCK Flash Charge and Discharge
KEY BLOCK SSW Input, RSW Input, KSW Input
LCD BLOCK LCD Output CN, Back Light Control
MOTOR BLOCK Shutter/Iris/AF Drive (IC151)
PMAN BLOCK Power Control, LED Driver, Flash Charge Control (IC401)
PROCESS BLOCK (IO) Image Signal Processing (IC201: 1/3)
PROCESS BLOCK (PW) Power Input (IC201: 2/3)
PROCESS BLOCK (SYS) System Control, USB Communications (IC201: 3/3)
AF LED BLOCK AF_LED Output
CN BLOCK Connection with the FLASH PWB
EMI BLOCK High Frequency Noice Reduction
LCD DATA7 BLOCK LCD Signal Compensation
MEDIA BLOCK Media Data IN/OUT
PLUNGER BLOCK Flash Pop-up
USB BLOCK USB Signal IN/OUT
KSW PWB KSW BLOCK Key Switch, Interface for MSW
FSW PWB FSW BLOCK Flash Pop-up Detection
MSW PWB MSW PWB Camera Mode Select
RSW PWB RSW PWB Release, Camera/Play/Power, +/- Drive Input
XE PWB XE BLOCK Flash Firing
SSW PWB SSW BLOCK Mic, One-touch AF, AF/MF/C-AF Input, Speaker Output
3. Schematics
3-1. Cautions
<Cautions when replacing parts>
• Do not reuse removed parts. Always use new parts.
• Note that the negative side of tantalum condensers is readily damaged by heat.
• Except for chemical condensers and tantalum condensers, voltage is not displayed on condensers with a voltage
resistance of 50V or less.
• Resistors not marked are 1/16W chip resistors.
• K
Ω
= 1000
Ω
, M
Ω
= 1000K
Ω
• B characteristics of variable resistors and semi-fixed resistors are not displayed.
3-2. Basic Block Names and Functions