FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 118 / 138

5-6
5. Inspection
FinePix S6000fd/S6500fd Service Manual
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
15
16
Factory setting
Checking standby
current Power
OFF
(1) Mode dial
(2) Flash
(3) Battery and cards not
inserted
(4) Card cover
(5) Battery cover
(6) Power lever
(7)Focus mode selector
switch
(8) EVF diopter adjustment
dial
(9) Zoom position
(10) Jack cover
(11) SETUP frame No.
(1) Connect the power supply
jig to the DC IN jack.
(2) Set the power supply
voltage.
(3) Check the standby current
when the power is turned
OFF.
(1) AUTO
(2) Pop down
(4) Closed
(5) Closed
(6) OFF
(7) S-AF
(8) Center position indicator
located close to the center.
(9) Set the zoom to the W
end.
(10) Closed
(11) New: The default SETUP
frame No. setting is
“Continuous”, but to clear
the number of frames in
the frame number
memory to zero, you
should always change the
setting to “New” before
turning the camera off.
(2) 5.00V ± 0.05V
(3) 20 mA or less (Due to the
possibility of measuring
instrument error with a
minimum unit of 0.01 A, 2
units should generally be
used.)
*Setting and clearing date
(1) Connect the USB
cablefrom the PC to the
camera (ensure that the
PC isswitched ON).
(2) Open the card cover
andswitch power ON
(POWER_ON) while
pressing the shutter
button.
(3) Switch power OFF
(POWER_OFF).
(4) Check that the date
hasbeen cleared.