FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 77 / 138

4-15
4. Adjustments
FinePix S6000fd/S6500fd Service Manual
< Use the pattern box for Camera adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
140 ± 20cd/m 2 (with LB140 filter)
No chart, center of pattern box
Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 140 ± 20cd/m
2 .
(2) Color temperature:aa
6100 ± 200K (with LB140 filter)
No chart, center of pattern box
Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the filter (LB140) in contact with the color temperature meter, adjust
the pattern box color temperature to 6100 ± 200K.
• Reference
Without the filter (LB140)
Luminance: 600 ± 60 cd/m
2 With the luminance meter connected to the pattern box
Color temperature: 3200 ± 100K With the color temperature meter connected to the pattern box
<Calibration method of pattern box>
LB140
Pattern BOX
(All white)
< Adjustment >
<Step 1>
Select [F4] CCD Defect Correction / OFD Adjustment on the [Adjustment Items Select] screen.
--> The [CCD Defect Correction / OFD Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
—> The [CCD Defect Correction / OFD Adjustment start] screen appears.
CCD Defect Correction / OFD Adjustment
< CCD data Preparations >
(1) Prepare the LB140 filter.
(2) Adjust the color temperature of the pattern box (PTB450)
to 6100+-200K.
(3) Adjust the luminance of the pattern box (PTB450)
to 140+-20cd/m
2
.
(4) Fix the camera on a tripod and set it in front of the
pattern box.
When preparations (1) - (4) are complete,
press the [Enter] key on the PC.
<Fig. 4-9-2>