FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 114 / 138

5-2
5. Inspection
FinePix S6000fd/S6500fd Service Manual
5-3. Inspection and Factory Settings
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
1
2
3
External visual
check
Power switch
check
Shock noise check
in Auto mode
Auto mode
LCD-ON
EVF-ON
Auto mode
LCD-ON
(1) Observe the camera.
(1) Connect the power supply
jig to the DC IN terminal.
(2) Insert a card and close the
card cover.
(3) Select the Mode dial
setting.
(4) Set the Power switch to
photography mode.
(5) If a message appears
asking for the language
and date to be set, press
the specification button on
the right.
(6) Check the display status.
(7) Press the <EVF/LCD>
button.
(8) Check for blemishes in the
CCD live image.
(1) Apply a shock to the
camera.
(1) Check for damage to the
outer casing
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the viewfinder and AF-
assist flash window.
(4) Check for dust or fogging
in the LCD.
(1) Applied voltage:
5.00V ± 0.05 V
(2) Card for recording
checking
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) <DISP/BACK>
(6) Check that the live image
and text is displayed.
(7) Check that the live image
is displayed.
(8) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check for problems on the
LCD monitor.
Check that the camera
recovers from
synchronicity disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.