FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 115 / 138

5-3
5. Inspection
FinePix S6000fd/S6500fd Service Manual
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
4
5
6
7
Resolution check
Focusing check
Checking Manual
Focus
Movie/audio
recording check
Movie/audio
playback check
Auto mode
LCD-ON
Auto mode
LCD-ON
Movie
mode
LCD-ON
Playback
(1) Use a macro resolution
chart as the subject.
(2) Set the camera to Macro
mode.
(3) Set the camera up so that
the chart fills the screen
from corner to corner.
(4) Press the shutter button to
take a picture.
(5) Set the flash mode to red-
eye reduction mode and
after S1 press the flash
pop-up button.
(1) Set the focus mode
selector switch to MF.
(2) Press the <One-touch AF>
button.
(3) Turn the focusing ring.
(4) Set the focus mode
selector switch to AF.
(1) Set the Mode dial to Movie
shooting mode.
(2) Press S1 -> S2 and then
release S2 -> S1.
(3) After 5 seconds, press and
then release S1.
(1) Set the camera to
Playback mode.
(2) Press the 4-way button
(down) to play back the
movie.
(2) Press the 4-way button
(left) and check that the
Macro icon (tulip) appears
on the LCD monitor.
(4) The indicator lamp lights
green -> orange or green
(recording) -> turns off.
(5) 4-way button (right)
operation: Check that the
red-eye reduction icon
appears on the LCD
monitor.
Do this in low-light
conditions.
(1) Check that MF is
displayed.
(2) Focus the shot and check
that the circle displayed in
the center of the screen
turns yellow.
(3) Check that appears
below the circle in the
center of the screen and
that the focusing works.
(4) Check that MF is no
longer displayed.
(1) Check that “STANDBY”
appears on the LCD
monitor.
(2) Check that movie/audio
recording begins.
Check that “REC” appears
on the LCD monitor.
(3) Check that movie/audio
recording ends and that
the data is recorded on the
card.
(2) Check that the movie is
played back on the LCD
monitor.
Check that the sound is
played back through the
speaker.
Check that sound is played
back over external
speakers.