FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 72 / 138

4-10
4. Adjustments
FinePix S6000fd/S6500fd Service Manual
FinePix S6000fd_S6500fd Jig Mode Setup Screen
1. Set the Jig mode by using [Power cable jig (5V)].
1) Set the mode to the [AUTO] mode.
2) Set the focus mode to the [S-AF].
3) Open the Card cover.
4) Connect the USB cable.
5) Supply 5.0V+-0.1V to the camera using the jig the [DC Jack cable]
as appropriate for the adjustment details.
6) Switch camera power ON while pressing the shutter button.
7) Ensure that the Led is lit.
When steps 1 to 7 are complete, press the [Enter] key on the PC.
<Fig. 4-7-3>
<Step 4>
—> The [Firmware version check] screen appears.
<Step 5>
—> The [Adjustment Items Select] screen appears.
<Note>
(1) [F1] Battery Adjustment cannot be run unless the Power Cable Jig is used to supply power to the camera.
(2) When new MAIN PWB ASSY is replaced, MAIN PWB ASSY is automatically initialized. At that time, wait for one-two
minutes, and advance the adjustment according to the instruction of the adjustment software.
FirmWare = 1.81
Vendor Name =FUJIFILM
Manufacturer =FUJIFILM
ProductName =FinePix S6000fd
Device Type
=CAMERA
SerialNo =592D3131333706082380C113000008
Frame Work =1.00
Please download a new version if it is necessary
to download the firmware.
Advance to the adjustment item selection screen
when press the [Enter] Key of PC.
<Fig. 4-7-4>