FujiFilm DRI-CHEM NX10N, Instruction Manual

Page: 58 / 102

8 Mode Settings and Functions
8-4
8
897N120152H FDC NX10N Instruction Manual 04.2022
8.2 Mode 0 - Changing Mode Type <Normal>
The important modes, which affect test results such as Mode 10 (correlation coefficients settings), can only
be operated in the administrator mode.
MODE
START
(1) Enter into Mode 0.
Select
/%JCPIGOQFG
7UGTOQFG
#FOKPKUVTCVQTOQFG
5GTXKEGOQFG
START
MODE RERUN
(2) Select the administrator mode.
Select the administrator mode by the scroll keys
, then press the ENTER key.
NOTE: Although the service mode will be displayed on
the menu, the mode is not available.
To enter Administrator mode, input the password.
/%JCPIGOQFG
2CUUYQTF!
ع
/%JCPIGOQFG
'PVGTGFKPVQ
#FOKPKUVTCVQTOQFG
/QFG!
/%JCPIGOQFG
/%QPVTQNOQFG
/&CVGVKOG
/&CVGHQTOCV
/&CVCEJGEM
/$CVEJRTKPV
START
(3) Input the password.
Input the password and press the ENTER key.
NOTE: If the entered password is not correct, a beep
sounds and the password entry screen will be
displayed again.
(4) The analyzer has entered into the administrator
mode and informs it on the display.
NOTE: When turning the power off, the administrator
mode will be canceled.