FujiFilm DRI-CHEM NX10N, Instruction Manual

Page: 64 / 102

8 Mode Settings and Functions
8-10
8
897N120152H FDC NX10N Instruction Manual 04.2022
(3) When the host computer is connected, transmit
the test data.
Press the ENTER key to start the transmission.
(a) Select [Transmit data] .
Select [Transmit data] by the or key,
and then press the ENTER key.
If the host computer and the printer are con-
nected to the analyzer, select [Transmit data] ,
and then press the ENTER key.
NOTE: After a beep sounds and the message is dis-
played about two seconds, the analyzer returns
to the test result screen.
If the host computer is not connected.
9
0QJQUVEQOEQPPGEVGF
6WTPRQYGT591((
%JGEMVJGEQPPGEVKQP
When the data transmission is completed, the
analyzer returns to the test result screen.
NOTE: Press the C (clear) key to return to the mode
selection screen.
Return to the Test Result Screen
A beep sounds when transmitting data
is complete.
/&CVCEJGEM
6TCPUOKVFCVC
2TKPVFCVC
6TCPUOKVVKPI
START
Select
MODE RERUN