FujiFilm DRI-CHEM NX10N, Instruction Manual

Page: 31 / 102

4 Operations
4-7
4
897N120152H FDC NX10N Instruction Manual 04.2022
START
(7) Press the
START
key to start the test.
2015-12-02 10:00
M e a s u r i n g
ID=9876543210123
Countdown mm:ss
LotNo.=123456 <W>
The message shown on the left appears during the
test, and the remaining time is displayed.
IMPORTANT:
Do not insert a slide to the slide loading part. Other-
wise, the equipment failure may result.
2015-12-02 10:00
P r o c e s s i n g
ID=9876543210123
Do NOT power off
LotNo.=123456 <W>
2015-12-02 10:00
ID=9876543210123
5 0
(12-66) ug/dl
LotNo.=123456 <W>
The reference interval
is displayed.
2015-12-02 10:00
R e a d y
ID=9876543210124
LotNo.=123456 <W>
The message shown on the left appears during cal-
culation.
The test result is displayed when calculation is com-
pleted.
(8) When the test finishes, the used slide is ejected
into the disposal box.
(9) By pressing the C key, the preparation screen
for the next sample testing appears. For the next
sample testing, repeat steps (1) – (9).
IMPORTANT:
Make sure to empty the disposal box every 10
slides or less. If the disposal box is full, errors may
occur in slide transferring and produce inaccurate
test results.
After testing, check that the sample ID shown on
the test result is correct.
When connecting to the host computer, make sure
that the test result is transmitted correctly when the
test is completed. In case of pulling a USB cable
off while at work, no error occurs. It may cause an
unawareness of no-transmitted test results.
Always use a new tip from FUJI CLEAN TIPS for
each sample.