FujiFilm DRI-CHEM NX10N, Instruction Manual

Page: 9 / 102

1 Safe Usage and Handling Precautions
1-1
1
897N120152H FDC NX10N Instruction Manual 04.2022
1. Safe Usage and Handling Precautions
This section contains safety precautions which must be followed for the safe operation of the FUJI DRI-
CHEM NX10N (henceforth, the FDC NX10N).
Before using this equipment, please read this chapter carefully and follow the precautions given, so that you
can operate it correctly.
1.1 Definition of Specific Safety Precautions
Specific safety precautions are noted by the terms WARNING, CAUTION, IMPORTANT, and additional infor-
mation by NOTE. The respective meanings are as follows:
WARNING:
Indicates hazardous situations that may lead to serious injury, even death or the transmission of infectious
agents if the precaution is not followed.
CAUTION:
Indicates hazardous situations that may lead to minor or moderate injury or physical damage if the caution is
not followed.
IMPORTANT:
Indicates improper handling that could have an adverse effect on the accuracy of the measurement values if
the precaution is not followed.
NOTE: Indicates procedures requiring special attention, instructions that must be followed, supplementary explana-
tions, etc.
1.2 Precautions Before Operating This Equipment
CAUTION:
Before using this equipment, please read this Instruction Manual carefully so that you can operate the
equipment correctly.
Whenever you operate this equipment, be sure to observe the precautions described in this manual.
Failure to do so may subject you to injuries, cause property damage, or produce incorrect test results.
In the mode functions described in Section. 8, there are 2 kinds of modes: one is the administrator
mode, which can only be operated by administrators; another is the normal mode, which can be oper-
ated by normal operators. The important mode functions, which affect test results such as correlation
coefficients settings, can only be operated in the administrator mode. The administrator modes must be
operated only by the administrators who have the responsibility for the use of the analyzer. Inputting a
password in the password input dialogue allows the administrators to operate the administrator modes.
Do not modify the FDC NX10N. Otherwise, the safety will not be guaranteed.
The durability period for this equipment is 6 years after installation at your site. (This period is valid as
long as the precautions for use are followed and regular periodic maintenance is performed correctly.)
As the concerns for safety or performance will increase when this period of 6 years expires, please con-
sult your technical support for advice.