FujiFilm BL-7000, Operation Manual

Page: 67 / 78

897N120551D
9-1
Chapter 9
Main Specification
Chapter
9
Main Specification
9.1 Specification
♦ Classification of Medical Electrical Equipment
1. Type of protection against electric shock: Class I equipment
(Power supply: Protective earth plug)
2. Degree of protection against electric shock: Type BF applied part
3. Degree of explosion protection:
Use is prohibited in an oxygen-rich environment
or in a flammable gas
atmosphere.
4. Degree of protection against ingress of water: IPX0
5. Mode of operation:
Continuous operation
Note Combination with VP-7000
♦ Applied Part
Insertion portion of applicable endoscope
♦ Specification
Power 100 - 240V ~
50/60Hz
Current consumption (rated) 1.2 - 0.7A
Fuse
T4AH 250V×2 (Rating: 4A/250V)
Light control Automatic light control by the control signal from the processor
Light cooling method Forced air cooling
Air supply pump HI/MID/LOW/OFF
Applicable Endoscope 700 system scopes, 600 system scopes, 500 system scopes
Dimensions (W × H × D) 390 × 155 × 485 mm (including projection)
Mass 12kg
Maximum air supply pressure 65 kPa
Maximum water supply
pressure
65 kPa
illumination source LED
Maximum light output
(light source) 1400 lm
Optical radiation safety (LED
for infrared communication) Class 1 LED product *
(IEC 60825-1: 1993+A1: 1997+A2: 2001: 2007)
Power transmission
frequency 110 to 205 kHz
Effective radiatied power 15 W or less
* “Chapter 3, 3.1 Front Panel, (19) Communication Window (LED)” falls into this class.
BL7000_E-50_897N120551D.indb 1 2016/09/05 14:06:19