FujiFilm BL-7000, Operation Manual

Page: 17 / 78

897N120551D
1-7
Chapter 1
Precautions
1.2.15 Electromagnetic interference
• This equipment has been tested and found to comply with the limits for medical devices
defined in EN 60601-1-2: 2007. These limits are designed to provide reasonable protection
against harmful interference in a typical medical installation. However, it is possible that
it may cause harmful interference to other devices in the vicinity, if it is installed and
used in accordance with the instructions. Also, there is no guarantee that interference
will not occur in a particular installation. Therefore, if this equipment does cause harmful
interference to other devices, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Change the orientation or position of any affected device.
• Increase the spacing between devices.
• Consult the manufacturer or dealer of the device.
Electromagnetic interference may occur on this product in the vicinity of equipment
marked with the following symbol or other portable and mobile RF (radio frequency)
communications equipment. If interference occurs, mitigation measures may be
necessary, such as reorienting or relocating this instrument, or shielding the location.
Noise may appear on the monitor of this equipment due to the effect of electromagnetic
waves. In this case, turn off the device emitting the electromagnetic waves or move the
device away from this equipment. Use the cable specified in the Operation Manual of the
processor for this product. Use of other cables may cause an increase in electromagnetic
emission or decrease in electromagnetic immunity of this product.
BL7000_E-50_897N120551D.indb 7 2016/09/05 14:06:06