FujiFilm BL-7000, Operation Manual

Page: 16 / 78

897N120551D
1-6
Chapter 1 Precautions
1.2.11 Foreign Matter and Liquid
CAUTION
• Before connecting the endoscope, ensure that no foreign matter is caught in the scope
connector section. If any foreign matter is caught in the power supply section, it may cause
malfunction or failure of the devices and may also generate heat. If any foreign matter is
caught, do not touch it directly with your hand but remove it after disconnecting the endoscope.
• Ensure that there is no foreign matter or dirt on the receiving window or on the communication
window before connecting the endoscope. If there is any foreign matter or dirt on the receiving
window or on the communication window, it may cause malfunction or failure of the devices.
• Make sure that the scope connector including the power-receiving section is thoroughly
dry before connecting it to the light source. In addition, make sure that no moisture or
foreign matter (such as metallic fragments, chemical residues, water deposits, grease,
dust, and gauze fibers) adheres to the power-receiving section. If the connector mount is
wet or soiled with foreign matter, it may cause malfunction or failure of the devices.
• Foreign matter, water and chemicals entering the equipment may cause a fire or electric
shock. In such a case, stop using the equipment immediately, disconnect the power plug
from the power outlet, and consult your local FUJIFILM dealer.
1.2.12 Disposal
CAUTION
• Follow the legal procedures when discarding the product. For the details, consult your
local FUJIFILM dealer.
1.2.13 Software Version
• Software is used to control the BL-7000. Therefore, the control method differs depending
on the version of the software being used. This instruction manual describes operation of
Ver. 1.0 - 1.9. The version is shown under the heading “Software” displayed on the screen
by pressing the [Shift] and [Note] keys at the same time.
1.2.14 Temperature at distal end
• Turn off the light when this product is not used for a long time, such as while hanging it on
a hanger before use. If the light is left on, the distal end may become hot, causing burn
injury to the patient.
BL7000_E-50_897N120551D.indb 6 2016/09/05 14:06:06